Stainless Prop repair

[Ed R]

Anyone in New England doing stainless prop repair?

[twitch]

I'm sure there are a few guys around that can do repairs but I usually send mine out to Mark Croxton doesn't take long good turn around and his work is beyond good. I have had a few done locally and nobody can make it run like him. Tell him your set up and what you want done or what you expect out of your prop or need more bow lift or whatever and he can deliver...just my opinion

[basscat21]

i will say the one in Plymouth took about 4mph off mine.....and really did not clean it up verywell..... I would send it out to Marks props

[Siebert Outdoors]

I'm sure there are a few guys around that can do repairs but I usually send mine out to Mark Croxton doesn't take long good turn around and his work is beyond good. I have had a few done locally and nobody can make it run like him. Tell him your set up and what you want done or what you expect out of your prop or need more bow lift or whatever and he can deliver...just my opinion

I've had Mark do 2 of my props. As long as he is in business I will keep sending them his way.

[plbass]

He's always worked on mine since way back when. Never a complaint and quick turnaround.

[twitch]

I had one done in Plymouth that a friend of mine recommended it was more than Mark and no way near the performance when I got it back been using Mark got the last 10 yrs Best around as far as I’m concerned

[basscat21]

I think locally they know saltwater props, and they are not accustom to fixing props for our style of boats. Light fast vs big and needing power to move weight.

[bassboat1]

I've had a couple repaired by H&H in Salem over the years.

[twitch]

That is problem down around our area a lot of saltwater fishing boats and there not up to par for high performance motors and props

[Ed R]

Yeah, I've used Mark as well over the last 15 or so years. All I'm looking for is some tip cup. Boat has been running pretty flat over the last couple of years. Just wondered if there was someone local.

Thanks guys

[yanknbass]

I've had a couple repaired by H&H in Salem over the years.

I used them a few times and was not very satisfied after the last time. Won't go into specifics but fewer and fewer people use them because of issues.

[Ed R]

Just shipped it off to Mark. It's always good to know you are getting what you pay for.

[twitch]

Let us know when you get it back and how it performs ok

[A Wood]

I used Mark, will never go anywhere else until he goes out of business.

[jayfaro]

I used Mark, will never go anywhere else until he goes out of business.

Which from the sounds of it, could be relatively soon as he's looking to retire

https://www.bbcboards.net/showthread...hlight=croxton

[twitch]

Well when that happens and I know it will hopefully he can recommend someone to fill his vacancy ...lol