Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Apr 2016
    Location
    Austin, TX
    Posts
    268

    Bow Graph Offset for FXR

    My trolling motor cable is hitting the corner of top graph on my dual 12" mount on the bow of my 2023 FXR20. Anyone modified the gimbal mount to move the top graph over an inch or two? Or did anyone go with an aftermarket mount to shift everything over?

  2. Member
    Join Date
    Jan 2019
    Location
    Abilene Texas
    Posts
    190
    #2
    i just move cables around the edge when i deploy trolling motor

  3. Member Ranchdip's Avatar
    Join Date
    Dec 2004
    Location
    Liberty, Tx
    Posts
    623
    #3
    I think bass boat technologies has a mount that will do that
    2022 Skeeter FXR21 Apex
    Helix 15/ Helix 12 / Garmin 1222 / LS34 Livescope

    Jer. 33:3

  4. Member 78Staff's Avatar
    Join Date
    Mar 2012
    Location
    Cosmo, FL
    Posts
    4,813
    #4
    https://www.bassboattech.com/index.p...ght-stack-tops

    I use one due to width of Ghost platform and cable running down the side... Of course you need the BBT Dual Mount setup if you don't already have it.

  5. Member
    Join Date
    Dec 2013
    Location
    oakdale, california
    Posts
    368
    #5
    Yes BBT mount allows for slightly offset from center mounting. A little hard to see but the mount it self that the silver BBT bracket bolts on to is elongated to the side furthest away from the TM, allowing for graphs to be secured further away. Occasionally the TM cable still comes into contact with the top left corner of top graph but fortunately, it's not at all difficult to move it over.IMG_1781.jpgIMG_1780.jpgIMG_1782.jpg

  6. BBC SPONSOR
    Join Date
    Feb 2020
    Location
    Benton KY
    Posts
    586
    #6
    We offer an offset over and under for trolling motor clearance!



    Shoot us a call for more information or to answer any questions!

    270-703-6133

  7. Member
    Join Date
    Jun 2007
    Location
    SE, PA
    Posts
    1,421
    #7
    Str8up mounts offers a 2" offset....reasonably priced too. I've heard good things about Precision Sonar mounts as well!

  8. Member
    Join Date
    Apr 2016
    Location
    Austin, TX
    Posts
    268
    #8
    Thank you guys for the suggestions. I'm looking into everything suggested now.