Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Dec 2007
    Location
    NE GA
    Posts
    84

    Course projection line

    I have 2 gen 4 12 inch helix’s and the HS projection line is missing on both when installed at bow where HS puck is. In the menu nav tab there are no options listed for course projection lines. The included picture shows what the nav tab lists. 5368ABDB-473D-4A4D-9F32-931851CDF3BB.jpegSoftware version 2.800 in both.

  2. Member Wayne P.'s Avatar
    Join Date
    Jan 2010
    Location
    Charlottesville, VA
    Posts
    30,311
    #2
    Did you Restore Defaults after you installed the current software?
    Wayne Purdum
    Charlottesville, Va.
    Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
    SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
    MEGA LIVE, LIVE TL

  3. Member
    Join Date
    Dec 2007
    Location
    NE GA
    Posts
    84
    #3
    Yes Wayne more than once.

  4. Member Wayne P.'s Avatar
    Join Date
    Jan 2010
    Location
    Charlottesville, VA
    Posts
    30,311
    #4
    I see you have User Mode set to Angler since you do not have the Alarm menus.

    If you are moving less than .6mph, you don't get the Coarse Projection Line, but will maintain the position icon with a AS GPS HS antenna or iPilot LINK subscribed.

    You are definitely missing a lot of Nav menu items:



    You get more menu items using User Mode Custom.
    If you are using the AS GPS HS, disconnect it and see what happens.
    After that contact Humminbird Customer Support.
    Wayne Purdum
    Charlottesville, Va.
    Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
    SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
    MEGA LIVE, LIVE TL

  5. Member
    Join Date
    Dec 2007
    Location
    NE GA
    Posts
    84
    #5
    Tried your suggestion Wayne,and it worked! A big thank you .