Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Dec 2022
    Location
    Rome, GA
    Posts
    5

    Everything on factory switch board QUIT

    1998 Spring 286 DC. All my lights, gauges and pumps (EVERYTHING CONTROLLED BY MAIN SWITCHBOARD) all went out at once! Where would my main breaker/fuse be located?

  2. Member Bill Reynolds's Avatar
    Join Date
    Aug 2013
    Location
    The Diamond State
    Posts
    3,865
    #2
    I don’t know if this applies, but my friend has a 2010 Skeeter that lost all power to the console. After a lengthy search we found an inline blade fuse rolled up in excess cable and stuffed in beside the gas tank. The fuse wasn’t blown but the cap had worked off and the blade fuse had worked it’s way out.
    unfortunately we did not find this problem until he had paid $300 for a new keypad.

    I try to drive as if my 16 year old Grandson is following me
    Speak as if he is listening and act as if he is watching

  3. Member
    Join Date
    Feb 2005
    Location
    Plainfield, IL 60586
    Posts
    322
    #3
    Normally the boat manufacturer's throw the main fuse around 1-2' of the battery, I have never seen something different. Continuity test will help with the location without too much hassle.

  4. Electrical/Wiring/Trolling Motors Moderator CatFan's Avatar
    Join Date
    Jun 2004
    Location
    SW Indiana
    Posts
    26,088
    #4
    Check under your cowling.
    If you have integrity, nothing else matters. If you don't have integrity,
    nothing else matters.​