Mega Live Depth Adjustment

[tajchauvin]

I’ve been unable to set my live display to where the transducer is at the far top of the screen. Instead I get a display of duplicated video from 1-2 feet. I’ve tried adjusting the Installation Depth setting to all levels and it never adjust properly.

I’m the below pictures my transducer sits at 2 feet. I would like it to sit at 0 feet.
30B38351-BF1B-499D-9340-32B94F01D0D4.jpeg
88692468-1313-496A-AAE8-CDEA4109B215.jpeg

[Wayne P.]

The surface was moved down about 1' with one of the software updates so lure splashdown would be more visible.
There is no minus install depth to offset that.

[tajchauvin]

Thanks Wayne. That’s somewhat unfortunate for what I would like to achieve.

[SLYDoggie]

Thanks Wayne. That’s somewhat unfortunate for what I would like to achieve.

What is it that you are trying to achieve?

[tajchauvin]

I’m working to establish some shallow water applications but the double image makes it difficult. With this feature it would be great if I could chose to disable it or establish a depth line similar to a depth ring on 360.