NMEA 2000

[fastguy]

Is a 250 SHO equipped to support nmea 2000?

[yam911]

Yes.

[fastguy]

Thank you

[Hewesurdaddy]

Go to Golden Channels website. They are very NMEA knowledgeable and can sell you Yamaha plug and play set up.They also answer the phone and will help you with any questions.

[bbarthelt]

I installed this cable (https://www.lowrance.com/lowrance/ty...face-cbl---rd/)on my 2010 SHO (VF250LA). The cable taps the engine into the NMEA network. I was then immediately able to get all manner of engine data on my lowrance graphs in the data overlay. I now have engine temp, fuel flow, and a bunch of other things displayed at all times.

[jpt7779]

I installed this cable (https://www.lowrance.com/lowrance/ty...face-cbl---rd/)on my 2010 SHO (VF250LA). The cable taps the engine into the NMEA network. I was then immediately able to get all manner of engine data on my lowrance graphs in the data overlay. I now have engine temp, fuel flow, and a bunch of other things displayed at all times.

I used the exact cable and have it connected to two Garmin 106sv’s.


NMEA 2000 Engine display options:

Hours
RPM
Alternator voltage
Temp
Fuel pressure*
Fuel rate*
Oil Pressure*
water pressure*
trim**

* all require separate sensor
** requires analog trim gauge to be disconnected you can not use both.

[Horton]

I used the exact cable and have it connected to two Garmin 106sv’s.


NMEA 2000 Engine display options:

Hours
RPM
Alternator voltage
Temp
Fuel pressure*
Fuel rate*
Oil Pressure*
water pressure*
trim**

* all require separate sensor
** requires analog trim gauge to be disconnected you can not use both.

It drives me crazy on my custom gauge screen on the lowrance I can't add speed bc NMEA doesn't have it as an option.

On the trim, is it easy to disconnect the analog gauge? I can't see it for my HDS 12 anyways so would be cool to display that.