Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Mar 2005
    Location
    Cuba City
    Posts
    306

    Adding blinker Trim ZX 150, wiring 12v location

    On the zx series I found the up/down wires. Where do I pull the 12volts from? There are a couple red wires labeled acc2 and acc3, but image they run through the main switch on the panel. I would think the trim would be live at all times, at least it was on other boats I have.

  2. Member
    Join Date
    Feb 2018
    Location
    Kennesaw, Georgia
    Posts
    3,148
    #2
    What model motor?

  3. Member
    Join Date
    Mar 2015
    Location
    Bixby, OK
    Posts
    2,280
    #3
    Mine only works when the power is on. I think that's how most of them are wired. Is there not a red along with the blue and green wires you found? You could pull the shifter assembly out and tap into the red going to the trim switch on it.