Results 1 to 10 of 10
  1. #1
    Member fishnfireman's Avatar
    Join Date
    Apr 2005
    Location
    Amarillo
    Posts
    12,485

    Mega Live (out of water)

    Third day out on a five day trip the Mega live quit working. Message says its out of water.
    Where should I start to get it back working ?

  2. Member Wayne P.'s Avatar
    Join Date
    Jan 2010
    Location
    Charlottesville, VA
    Posts
    30,414
    #2
    Restore Defaults with the transducer deployed and powered.
    Wayne Purdum
    Charlottesville, Va.
    Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
    SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
    MEGA LIVE, LIVE TL

  3. Member fishnfireman's Avatar
    Join Date
    Apr 2005
    Location
    Amarillo
    Posts
    12,485
    #3
    I'll try that. I guess you need to do the wet towel or water bucket ?

  4. Member Wayne P.'s Avatar
    Join Date
    Jan 2010
    Location
    Charlottesville, VA
    Posts
    30,414
    #4
    Quote Originally Posted by fishnfireman View Post
    I'll try that. I guess you need to do the wet towel or water bucket ?
    Those or actually being on a body of water.
    Wayne Purdum
    Charlottesville, Va.
    Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
    SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
    MEGA LIVE, LIVE TL

  5. Member
    Join Date
    Feb 2006
    Location
    Pocatello Idaho
    Posts
    50
    #5
    Mine did that second day of a three day trip. I powered everything back off and back on, came right up.

  6. Member fishnfireman's Avatar
    Join Date
    Apr 2005
    Location
    Amarillo
    Posts
    12,485
    #6
    Tried that a couple of times with no luck. .
    My nearest lake is an hour away so will try to fix on trailer before my next tournament.

  7. Humminbird Moderator SLYDoggie's Avatar
    Join Date
    Aug 2015
    Location
    Franklin TN & Tims Ford Lake
    Posts
    3,899
    #7
    Quote Originally Posted by Wayne P. View Post
    Restore Defaults with the transducer deployed and powered.
    Wayne, are you talking about the Mega Live Restore Defaults, Helix full Restore Factory Defaults, or another Restore Defaults? Just want to be sure fishnfireman is performing the correct restore.
    ---> Regards, Steve Yarbrough (AKA: SLYDoggieTN on YouTube)
    • Apex 19/16/13, Mega 360, and Mega Live
    • Minn Kota Ulterra Quest Trolling Motor
    • (2) Cannon Optimum Bluetooth Downriggers
    • Impulse Lithium Batteries... 36V 60AH for Trolling Motor, (2) 12V 120AH for Cranking & Electronics, 12V 60AH for Downriggers


  8. Member Wayne P.'s Avatar
    Join Date
    Jan 2010
    Location
    Charlottesville, VA
    Posts
    30,414
    #8
    Quote Originally Posted by SLYDoggie View Post
    Wayne, are you talking about the Mega Live Restore Defaults, Helix full Restore Factory Defaults, or another Restore Defaults? Just want to be sure fishnfireman is performing the correct restore.
    Setup menu Restore Defaults. The same thing done when doing software updates.
    Wayne Purdum
    Charlottesville, Va.
    Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
    SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
    MEGA LIVE, LIVE TL

  9. Member fishnfireman's Avatar
    Join Date
    Apr 2005
    Location
    Amarillo
    Posts
    12,485
    #9

  10. Member fishnfireman's Avatar
    Join Date
    Apr 2005
    Location
    Amarillo
    Posts
    12,485
    #10
    This thing is possessed
    Set up with a bucket of water in the driveway. Fired everything up and WALA the live target works-- after not working for two days. When I needed it !!
    Except now the touch screen on the front unit isn't working (not the first time) it has a little gremlin that just likes jacking with this ole man.