Had Active Target, replaced with AT2. I am getting no source on units. Do I need any software updates before it will show? Originally tried old power cable, replaced that. Still have old network cable, but it’s a network cable and worked before the change. Any ideas?
Press Pages>Settings and on the right side of screen scroll down and select "Restore Defaults". DO NOT un-select anything already selected and DO NOT select anything else on the list. Just follow the on-screen prompts to the completion of the Restore Default process
Jonathan Adkins
2022 Nitro Z21xl 250 ProXS4S
HDSLive12s/Ghost/AT2/G360
This is a known issue especially for anyone previously running AT1...at least it was for me and I posted this from another thread...I will say you may get used to running this "fix" as AT2 has been very buggy for me...fingers crossed Lowrance comes out with an update. There is also a Russell Marine products youtube video with this as well.
Good luck.
-Jonathan
Jonathan Adkins
2022 Nitro Z21xl 250 ProXS4S
HDSLive12s/Ghost/AT2/G360
Will try tomorrow. Thank you
No luck. Tried it multiple times, two of the three units. NO SOURCE.
Reply With Quote