What would cause the plug that is plugged into the main power relay to melt getting power to relay but pump is not coming but will turn over thanks Ken
What would cause the plug that is plugged into the main power relay to melt getting power to relay but pump is not coming but will turn over thanks Ken
An electrical short some where, get out the manual and the meter and start troubleshooting.
Could it of possibly been caused by somebody crossing cables on battery?
Well that’s what I found wrong with it just looking the motor over I was asking because it’s going to the shop Saturday.
Starters don't care if the cables are reversed, but diodes, like in rectifiers and voltage regulators do. They feel it as a direct short, and something has to give. I have a 175 Ficht with a ventilated block under my work bench.Originally Posted by kxp
Have most of the engine harness
Last edited by billnorman1; 03-16-2023 at 06:25 PM.
Ya thats what I am thinking this one is going.
I am on the hunt for another 150 or 140 maybe after all the stories I hear about these motors I don’t know.
Reply With Quote