2003 TR186 Replacement Gauges

[4weight]

Guys, looking for feedback from the Triton board on aftermarket gauges, brand and size. Need to replace tach, water and speed gauges.

Any help would be appreciated.

Thanks,

4W

[XXXLTRP]

I did mine with Autometer silver marine with a GPS speedo. I had it narrowed down to those and a Faria Beede Platnium set. I couldn't get the right speedo parameters/ gps in the Faria Beede, so that pushed me to Autometer. Autometer has, chrome, silver, white and carbon fiber series.

https://fariabeede.com/2-pages/products_marine.php

https://www.autometer.com/gauges/marine-silver.html

[4weight]

I did mine with Autometer silver marine with a GPS speedo. I had it narrowed down to those and a Faria Beede Platnium set. I couldn't get the right speedo parameters/ gps in the Faria Beede, so that pushed me to Autometer. Autometer has, chrome, silver, white and carbon fiber series.

https://fariabeede.com/2-pages/products_marine.php

https://www.autometer.com/gauges/marine-silver.html

Thanks bud. I will check these out.

[Lightning 6]

Never look at any gauge except trim since I got vessel view mobile. You could go that route if your xr6 is compatible.

[fly by night]

Faria is a good choice as well.

[4weight]

Never look at any gauge except trim since I got vessel view mobile. You could go that route if your xr6 is compatible.

I will check that out but I am guessing a 2003 XR6 won't be. I am with you, I use the trim gauge all the time but I like to have the tach functioning to view RPM/Speed ratio on the engine. That will tell you a lot and if something is off, especially with an old motor.

[4weight]

Yup Lightning, the motors compatible on the Merc website are 2004 and up.

Dammit, that would be cool.

[Lightning 6]

Sorry, mine is an 06 opti…..was obviously not knowledgeable about xr6.

[4weight]

Sorry, mine is an 06 opti…..was obviously not knowledgeable about xr6.

No problem man, I appreciate you chiming in. I wish that would work for me. That is pretty cool.