Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Jun 2012
    Location
    Greenwood, SC
    Posts
    31

    Slidemaster jack plate

    Perhaps a silly question but...are there supposed to be washers & nuts on the inside of all 4 slidemaster jack plate bolts? I have them on the side with the talon mounted to it but none on the other side. Ashamed to say I never noticed it before. Am looking to raise the motor for the first time and picked up on it. Want to make sure all is in order before I do anything. Thx in advance for any insight.
    Attached Images Attached Images

  2. Member lpugh's Avatar
    Join Date
    May 2009
    Location
    Sacramento Ca
    Posts
    5,164
    #2
    No sir
    Thank You Leon Pugh

  3. Member
    Join Date
    Jun 2012
    Location
    Greenwood, SC
    Posts
    31
    #3
    Thx!

  4. Member
    Join Date
    Aug 2018
    Location
    1000 Islands, Ontario
    Posts
    958
    #4
    As Leon says they're not normally there, but a previous owner may have stripped the female threads on the inside plates and therefore added the nuts in order to tighten. Worth checking before removing them so the plate doesn't drop unexpectedly...
    2002 Skeeter ZX200
    2018 200SHO