Helix's, AS GRP HS, and Mega 360?

[rdfkentucky]

Hi
I have a Helix 10 Chirp Mega SI+ GPS G3N on the dash and a Helix 9 Chirp Mega SI+ GPS G3N on the bow, ethernet together. I have the AS GRP HS on the stern close to the transducer hooked to the Helix 10. I just installed a Mega 360 on my Fortrex trolling motor with the Y cable using the 9's transducer. I have been reading past post to try and find some answers, there's a lot of post.

How do I get the 360 to show up on my Helix 10 Screen? It show in the network source dialog box, but no screen view.

I know I can use the AS GRP HS as the GPS on my Helix 9, to mark way points, but if I do will it use that as the reference point?

I think it will be off the distance from the front to back and would I be better off getting another AS GRP HS to hook up on the bow?

Thanks
Rick

[Wayne P.]

The MEGA 360 should be listed in the Network Source menu on both units. Just check it on both units.

Yes.

Replace the AS GPS HS with the AS GRP and put the AS GPS HS at the bow connected to the Helix 9

[rdfkentucky]

Thanks Wayne, I ordered the AS GRP.