Installing a mega 360 on a Tracker that sits on a private community lake most of the season. I want to be able to remove it (M360) when not using it. Is there a plug, or similar I could use for this purpose ? Maybe a TM plug ?
Installing a mega 360 on a Tracker that sits on a private community lake most of the season. I want to be able to remove it (M360) when not using it. Is there a plug, or similar I could use for this purpose ? Maybe a TM plug ?
The M360 transducer has two short(ish) cables the plug into the longer transducer cable and power cable. They are a couple feet long (maybe less). You should just be able to use those.
The Mega 360 has a short screw on connector "pigtail" power cable connector coming out of the top of the shaft. Same for the transducer cable. All you have to do is unscrew these connectors to remove it from the boat. If you want to be able to use it in another boat, just buy another Mega 360 power cable and transducer cable.
---> Regards, Steve Yarbrough (AKA: SLYDoggieTN on YouTube)
- Apex 19/16/13, Mega 360, and Mega Live
- Minn Kota Ulterra Quest Trolling Motor
- (2) Cannon Optimum Bluetooth Downriggers
- Impulse Lithium Batteries... 36V 60AH for Trolling Motor, (2) 12V 120AH for Cranking & Electronics, 12V 60AH for Downriggers