BC Non-Slip Pads

[barbarian]

Does BassCat have any models that come with a bow non slip pad and/or do they sell any precut no slip pads for the bow of any boats? I’m getting a little old and using my trailer steps the other day I almost slipped off the bow and figured I might need to add something up there. I can get a generic and cut it, but a premade would be nicer. For the record, I have a P2.

[Unravels]

I used the basscat trailer nonskid decals before on my p2 bow, but didn’t like them because the sand would break off the decal and scratch the boat. it’s basically skateboard grip tape. I ended up putting these on it and like it more, is a rubber non-skid tape, but you have to cut them to fit.

https://www.gator-guards.com/products/gatorskinz

These are the basscat ones I used, they come on the bow of some of the other basscat models.

https://basscatstore.com/singleaxlefender-1-1-1-2.aspx

[white gambler]

Those gator guard pads look nice

[PMantle]

Since P2s don't come with the same area and pad as the other series, I bought some from the Basscat store for mine. There is an area up that that the pad fits on pretty well.

[Redngoo]

20210118_160934.jpg

Made mine from a BCB step pad.

[Bsmiley]

Just wondering how you cut out that pattern I have a p2 but seems a little awkward to trace . please advise

[Redngoo]

I used tracing paper, most of all a little patience is required!

[Bsmiley]

Thanks I will do that

[Redngoo]

Why Basscat doesn't put a pad there amazes me. In front of the pad I use the 3m bra material it helps with the back of the foot and where the trolling motor cable rest.