Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Feb 2010
    Location
    Pineville, La.
    Posts
    1,716

    Ultrex release cable

    Do I have to find away to get in to the handle to shorten?

  2. Member
    Join Date
    May 2015
    Location
    Denair Ca
    Posts
    704
    #2
    No, just partially deploy the mtr and then begin pushing the cable backwards through the the guide. Look for the other end to become visible underneath the upper mount area. Once you have pushed enough cable through you can grab it with needle nose pliers. There is a threaded terminator on the end of the cable. Simply loosen the Allen head bolts in it and shorten the cable to your liking. Get the Allen bolts as tight as you are able too otherwise the terminator will slip at some time and come off the cable.

  3. Member
    Join Date
    Feb 2010
    Location
    Pineville, La.
    Posts
    1,716
    #3
    Thank you

  4. Member
    Join Date
    Feb 2010
    Location
    Pineville, La.
    Posts
    1,716
    #4
    How easy was that, love bbc, thanks