Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Nov 2009
    Location
    Spring Lake, Michigan
    Posts
    238

    Garmin Force pedal "sticking" issue

    Guys i have a Force that's been through 2 seasons, the first being very light use. What i'm noticing as time goes on is what I can only call "sticking" or a "notchy" pedal when the motor head turns... like early on it was nice and smooth and the motor turned as smoothly as the pedal... now it does not. you might ease it right, and the motor doesn't move until you go past your desired angle and it jumps over to catch up. almost like it's on a delay.

    I assume the metal disc under the pedal is what talks to the sensor to tell it where the position is. can this thing corrode or need cleaning to make sure that signal is good?

    thanks! Sharkey

  2. Member
    Join Date
    Jan 2010
    Location
    Marlow, OK
    Posts
    3,458
    #2
    Best plan is to call Garmin customer support. They were very helpful and got me a new pedal in 2 days!