Need a Bearing Buddy type cover that's shorter, about 1.75 inches or so

[HankinBama]

Just swapped to newer larger rims/tires, went to install bearing buddy's and they are actually too tall for my center caps to fit.

Bearing buddy is 2 inches, looks like I need something 1.5-1.7 or so tall (1.98 inner hub)

Any suggestions on solid brand to get?

[mactlman]

these are the best ones made might be shorter also call alan in parts and maybe he can measure them?

https://basscatstore.com/buddybearingprotecto.aspx

[HankinBama]

Thanks for the link. Regrettably those are the ones I bought that are a little too long though.

[jimmymo32]

Do you have an ez lube spindle (the one with a hole for a zerk fitting, or actually has a grease fitting on it already?) If so then you wouldn't need a bearing buddy and could use just the ez lube caps as they're much shorter than a bearing buddy

[Lightning 6]

Shoot e-trailer a question. They are really good about providing dimensional drawings, weights, etc…..have done so for me many times.

[Bluzharp]

If you have fender clearance, you may be able to use wheel spacers. Of course that may require longer studs. Just throwin' it out there.