Hi guys,
I’ve been having a great deal of issues with my 112 Ultrex (2018 model I believe). The boat sat for 4-5 months then went to take it out and pedal went stiff first time I tried to use it. I hit spot lock, it spun one direction then went stiff. I can’t get it to turn. I swapped the pedal sensor with one from another ultrex that worked, that wasn’t it. The head will not turn with the remote or the pedal. The motor/propeller engages fine. I replaced the board thinking that must be it. Nope. I checked continuity in the brown, black, and white wires at the pedal to the head unit and little connectors under head unit. All good. I have 38.6 volts at the connectors to the main board. I can physically turn the head by hand. I loosened the tension on the cables to see if it improves anything, nope. Any advice or other places to look would be greatly appreciated. I feel like I’ve left no stone unturned but obviously I have.