Results 1 to 9 of 9
  1. #1
    Member
    Join Date
    Jan 2006
    Location
    Austin, TX
    Posts
    965

    Props for VX20 or VX21?

    Is anyone here running anything other than a Fury 23x14 3 blade on a VX20 or VX21? If so, what and what are your results? Thanks!

  2. Member
    Join Date
    Apr 2013
    Location
    Belleville, IL
    Posts
    268
    #2
    Quote Originally Posted by rangerranger View Post
    Is anyone here running anything other than a Fury 23x14 3 blade on a VX20 or VX21? If so, what and what are your results? Thanks!
    rangerranger, what have your results been with your 23 Fury 3? I have a VX21 and not wuite 10 hours on my mercury 250. I turn about 5850 rpm at 66-67 mph with 2 people, a full tank and too much tackle. Just me and same load is 67-68 at 5900-5950 rpm. I have also been wondering about trying a different prop but not sure where to start.
    VC Marine
    Cashion Rods
    Lew's
    Vexus Boats

    2022 Vexus VX21, 250 ProXS

  3. Member
    Join Date
    Feb 2007
    Location
    Oliver Springs Tennessee
    Posts
    282
    #3
    I run a fury 4 23 pitch some runs a 23 trophy plus with good results

  4. Member
    Join Date
    Apr 2013
    Location
    Belleville, IL
    Posts
    268
    #4
    Quote Originally Posted by Skeeter A View Post
    I run a fury 4 23 pitch some runs a 23 trophy plus with good results


    What are your rpms/speed with the fury 4?
    VC Marine
    Cashion Rods
    Lew's
    Vexus Boats

    2022 Vexus VX21, 250 ProXS

  5. Member
    Join Date
    Feb 2007
    Location
    Oliver Springs Tennessee
    Posts
    282
    #5
    Fury 4 runs 5890 at 67 I’ve ran a 23 fury 3 blade it run fine I like the four blade it handles better over all.

  6. Member
    Join Date
    Mar 2017
    Location
    New Jersey
    Posts
    110
    #6
    I have VX21 with merc 300. I had my 3 blade balanced and blue printed by Mark and saw some improvement. My Rpm is over 6000 and I'm seeing 70mph more often. These engines like a lot of trim and raised jackplate. I'm still trying to find the right set up myself but I know I'm getting closer

  7. Member
    Join Date
    Feb 2007
    Location
    Oliver Springs Tennessee
    Posts
    282
    #7
    Someone try a revolution 4 blade prop it looks fast.

  8. Member
    Join Date
    May 2013
    Location
    Texas
    Posts
    173
    #8
    I tested a Razor 4XL 24p 4 blade prop from Mark. Ok, not real useful as the pitch was wrong (I knew that going in - was my spare prop I had for my Skeeter ZXR21) but still a data point. I have a VX20 with Merc 250. Stock Fury 23p prop with just a little seat time (new boat) gets me upper 60s. I think it'll get close to 70, but I'm not comfortable enough yet. It hits 6000rpm too. Good holeshot. A fair bit of brief bowrise.

    With the Razor 4XL 24p 4 blade on a cool day with light chop got me only upper 50s MPH, right under 60mph, max RPM was 5000. Bow rise on holeshot was a little less, but took longer with the steeper pitch (too steep). I was surprised the trim with this prop didn't move the bow up/down as much as it did with my Skeeter. The 4 blade on that boat really helped it and stayed hooked up a lot better in the turns vs. the Skeeter with 3 blade. But the Vexus hasn't had any issues with blowout in the turns with the 3 Fury or 4 Razor. I didn't adjust the jackplate (still a manual one on the boat at this time). I did sense more chine walk with the 24p Razor 4 blade. Not sure if that's a pitch thing here or 3 vs. 4 blade thing.

    I'd like to try a 4 blade Razor 4XL in the proper pitch (22p or even 21p) to see the direct difference. Or just do a Fury 4 blade to see direct comparison with the stock 3 blade Fury. OR, just stick with the Fury 3 for now. But I do want a spare prop for the boat regardless.

  9. Member
    Join Date
    Feb 2007
    Location
    Oliver Springs Tennessee
    Posts
    282
    #9
    Get a fury 4 blade 23 pitch I have a croxton 4xl in a 22 pitch fury 4 blade is better on my vx21 I have a trophy plus at marks now getting worked I think 68 is all my vx21 going to run