I have a pair of Solix 12G2s. For the first two years used with an Ulterra. Was able to follow contour less than 5 ft without an issue. This past summer I got target lock and changed to an Ultrex. I updated all the software. After this point any time I attempted to follow contour 5 ft or less, or selecting 6ft or more and offsetting the contour shallow, follow contour won’t work. When the shallow water warning pops up I use to be able to acknowledge the risk and continue. After Ultrex TL and software , when acknowledging shallow water risk follow contour won’t engage.
I am curious if anyone has or experienced the same issue?
I believe I have searched and read manuals both MK and HB and have not found a reason why this should not work. So either the Ultrex functions different than Ultrex for FC < 5 ft or the software updates for Solix from this past summer broke the FC <5ft function.
I have submitted multiple problem reports to HB they blame MK and MK blames HB. My gut feel is it is a known issue or is broken by new VX tech. But obviously I don’t know.