My horn in my 2015 Skeeter ZX 250 went out. I can't see it good enough from the access panel at the bottom of the console. I would have to pull the dual graphs and BBT mount off to see it. Does anyone know what horn Skeeter uses so I can get a replacement?
It,s possibly the horn relay, not the horn itself (if that year uses a relay). It would be attached to your fuse panel and is normally a standard automotive one, not expensive.
2002 Skeeter ZX200
2018 200SHO
On my 2016 ZX 250 I removed the windshield to access the horn and replace it. My horn was a Marinco AFI Model L. Got mine from Amazon around $25.00. If your windshield has a number of small holes, that's for the horn sound to come out and your horn will be right behind the holes.
Last edited by raven7usa; 01-08-2023 at 09:56 AM. Reason: added info
2016 ZX250
Give Skeeter a call have your S/N handy.
Bill Perry
Zwolle, LA (Toledo Bend)
bpicinc_2000@yahoo.com
2001 ZX-250 VMAX 225. HDS-9 Carbon, HDS-7Carbon, 3D Sonar, HB 998c hd si, Active Target, MG Tour Pro 36v, 12" Slide Master
USN, USS Newport News CA-148
My windshield does infact have the holes in the front. I havent had a chance to take windshield off yet (boats in storage for winter) but I will check it out. Thank you!Originally Posted by raven7usa
This is what I used. Plug and play.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
2016 ZX250
Thanks guys! Pulled the windshield and sure en⁶ough the horn was there. Held in with 2 torx screws. Tested the horn and its dead. Battery voltage to the wires when horn button is pressed. Easiest thing I have ever done on a boat. Ordered the horn from Amazon. Thanks again!
Once you get it out you might just give it a few taps with a screwdriver or something, sometimes if not used it will seize up.
A few whacks and it will be back to operational.
Reply With Quote