Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Dec 2008
    Location
    baltimore
    Posts
    125

    Faded console - not fiberglass

    I bought an Alumacraft that the guy left out in the elements. The plastic is very faded. What’s the best way to bring the color back. I’ve tried waxing but no luck. Any help would be greatly appreciated. Thanks jim

  2. Member wareagle24's Avatar
    Join Date
    Aug 2009
    Location
    Florence, Al.
    Posts
    16,317
    #2
    This works really good on car and truck exterior trim pieces so it will probably work well for what you need.

    image photo upload free

  3. Electrical/Wiring/Trolling Motors Moderator CatFan's Avatar
    Join Date
    Jun 2004
    Location
    SW Indiana
    Posts
    26,089
    #3
    Sometimes going over it with a heat gun can do miracles, but you probably can’t reverse it. Take it easy until you see how it works.
    If you have integrity, nothing else matters. If you don't have integrity,
    nothing else matters.​

  4. Moderator Luke's Avatar
    Join Date
    Oct 2004
    Location
    Sullivan,MO
    Posts
    29,048
    #4
    Quote Originally Posted by CatFan View Post
    Sometimes going over it with a heat gun can do miracles, but you probably can’t reverse it. Take it easy until you see how it works.
    Same thing I was going to suggest.
    A lot of times on faded black plastic heat will bring some of it back.
    Just have to be careful not to get it too hot and melt it

  5. mikesxpress
    Guest