For those Z21 XL owners that run two graphs on the bow, what mount did you use. I’m running a single HDS 12 but wanting to add either another 12 or a 9 for chart only.
For those Z21 XL owners that run two graphs on the bow, what mount did you use. I’m running a single HDS 12 but wanting to add either another 12 or a 9 for chart only.
Precision sonar, I use them got 2 12s on the front. Solid mount.
Last edited by BMCD; 01-05-2023 at 08:49 AM.
Bryan McDonough
2023 Nitro Z21 XL
Nitro Team
I like an over the pedal mount that mounts to the deck of the boat. I just don’t like the idea of multiple graphs secured at the bow.
Nitro z21
I am running 2 bridges (1 flat, 1 angled) for my 2 12" HDS Lives, with gimbals from BBT. Originally I had planned to replace this later but have been running it for a year plus. No issues and was about $160 for the bridges plus the BBT gimbals (which are not cheap but infinitely stronger than stock LIVE gimbals).
Good luck.
-Jonathan
20230104_113746.jpg
Last edited by Lkmbjb502; 01-05-2023 at 08:29 AM. Reason: Picture editing
Jonathan Adkins
2022 Nitro Z21xl 250 ProXS4S
HDSLive12s/Ghost/AT2/G360
One note I will say you need to pad the gimbals or modify your cover to fit and not rub holes in the cover.
Bridges
Attachment 509455
Jonathan Adkins
2022 Nitro Z21xl 250 ProXS4S
HDSLive12s/Ghost/AT2/G360
Have a 2021 z21. I have a dual stack mount from Bass Boat Technologies. Solid as a rock.
Is an offset to the right needed to mount the dual 12’s? Worried about clearance with the trolling motor.
Mine is offset, but I moved the whole bracket so they vertically align.
With a ghost you will need to offset some.
Bryan McDonough
2023 Nitro Z21 XL
Nitro Team