This came out from Behind the rocker switch for the bilge pump. Does anybody recognize this and can I just put back another wire without the connector?
This came out from Behind the rocker switch for the bilge pump. Does anybody recognize this and can I just put back another wire without the connector?
Last edited by bigfishn902; 12-28-2022 at 05:22 PM. Reason: Resize unsuccessful?
Well anyway, it’s a 6” wire with plastic connection in the middle
What color is the wire? Also what year and model boat?
Oh, copper wire black connector from 06 198
Hard to guess accurately with that description. You need to pull the panel and look.
Maybe... a ground jump for the light on the rocker. Often, the grounds on the panel rocker switch lights are jumped from switch to switch.
1994 201 Champ re-powered with a 250 HO G2 E250LHAFA 05438419
Don't think even Carnac can help you without a picture.
Email the pic to me, txchamp@suddenlink.net
Thanks TX champ
That's a diode. No other wiring attached to it?
IMG_1191.jpeg
There’s actually 3 others hooked to the rocker switch, but it does jump over to acc
OK, what it's probably doing is blocking voltage from the bilge pump when the float switch is active. It keeps from powering up the Accy circuit. If you don't know what terminals on the switch it was and what direction, let me know the year and model of your boat and I'll see if I have a diagram.