I finally found a cheap 0.8 mm airbrush to try....

[21XDC]

I want to shoot thicker paints and glitters better. I'll let you know what I think after I use it...

https://www.amazon.com/TIMBERTECH-Mu...ps%2C92&sr=8-1

[School Master]

Let it fly!!!

[21XDC]

Any of my detail work is done with a stencil.... I don't free hand any details. I like consistency between baits. I almost bought some 1 mm brushes, But they are a different handle style than I'm used to.

[TerrysRanger374V]

I think you will like it. and they are easy to clean, the one I got looks similar,
I bought a 0.5 off eBay, and I actually like it and it sprays pretty well, I also use stencils so it worked out just fine

[21XDC]

I almost bought 4.... At the last min, I decided to just get 1 for now.

[Bryanmc57]

Will it spray powder?

[21XDC]

Will it spray powder?

I don't think so...

[21XDC]

I used this airbrush a lot this weekend. It's the best I have ever used so far. It feels great in my hand and is smooth. I tried the 0.5mm and the 0.8mm needles.

I like having several of each kind, So I will be ordering a few more.

[Coon Dog1]

How has this worked spraying metallic paints??? I have a pretty good one for straight colors but it plugs up anytime I use glitter paint or some pearls,

[21XDC]

Great so far.

[Munkin]

I would like to publicly thank you for being the Guinea Pig on these things as I usually buy things based on your recommendations. Those cheap sprue cutters you let me know about have worked great!

Allen

[21XDC]

Just an update... I own a ton of airbrushes and this one is the best I have bought. I'm shooting all metallic paints and fine glitter mediums w/o any trouble clogging.

I'll probably never go back to a .5mm needle. I have no need for them. I did order a few more, Just in case they get hard to find.

[Amistad Tackle]

Thanks for the review. I ended up buying one.

[21XDC]

Thanks for the review. I ended up buying one.

Please post your opinions after you use it some

[21XDC]

Will it spray powder?

And yes it does..... I tried it at low pressures from 0-10...

[detroit1]

Mike- you should show your squarebill , that thing is awesome.

[21XDC]

Mike- you should show your squarebill , that thing is awesome.

My old phone takes crappy pics... But thanks.

[cadman]

Mike, do you know if you can buy additional .8mm needles and nozzle caps for them if you damage one? If so where? I am going to use this for spraying clearcoat. Thanks

[21XDC]

I'm not sure, But they are cheap enough to own a few sets.

[Munkin]

Mike, do you know if you can buy additional .8mm needles and nozzle caps for them if you damage one? If so where? I am going to use this for spraying clearcoat. Thanks

I bought 2 and they came with extra parts.

Allen