Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Jun 2022
    Location
    Spring Hill Tn
    Posts
    27

    Cx19 nav and anchor lights

    Cx19 2022 model, the nav and anchor light switch on the main panel will not illuminate and lights don’t come on, the bow switch isn’t doing anything either. All other switches at the main panel work normally. Where is the fuse for the nav lights ? Dealer is an hour away and if it’s a simple problem would
    prefer to fix myself. Lights worked fine all year and just noticed today they wouldn’t come on.

  2. Member
    Join Date
    Jul 2009
    Location
    Huntersville, NC
    Posts
    20
    #2
    Check the pushbutton circuit breaker right below the switch on the main panel. Each switch has it's own breaker. I've had my boat since May and have already had to replace 3.

  3. Member
    Join Date
    May 2021
    Location
    Huntsville, AL
    Posts
    403
    #3
    Sounds like a wire disconnected. Take the panel off and check the connections .... There's only like 6 or 8 screws.

  4. Member
    Join Date
    Jun 2022
    Location
    Spring Hill Tn
    Posts
    27
    #4
    Ok I’m gonna do that when it warms back up, does anyone know what the part number for breaker or switch is ? Called caymas and was told they couldn’t ship me any electrical parts due to liability. I’m sure it’s a simple problem.

  5. Member
    Join Date
    Jul 2009
    Location
    Huntersville, NC
    Posts
    20
    #5
    Here's what I ordered from Amazon: Breaker

  6. Member
    Join Date
    Jun 2022
    Location
    Spring Hill Tn
    Posts
    27
    #6
    Thank you