Results 1 to 3 of 3
  1. #1
    Scraps
    Join Date
    Apr 2007
    Location
    Havertown, PA
    Posts
    9,586

    Sonar files for mapping

    I've finally gotten around to creating depth contour maps using Reefmaster. I've loaded my sonar logs onto Reefmaster, but I only get my tracks/trails to show up on Reefmaster. Now looking back, I see I needed to "convert" and save the sonar logs on my unit to a depth/sonar log after collecting the data? I know I didn't take this step, but imagine I could put the files back on a card, put the card in the unit, and convert the files??? The sonar files are .SL3.
    2017 Phoenix 819
    2016 200ProXS, s/n 2B359849, Mod 1200P73BD

  2. Member
    Join Date
    Nov 2013
    Location
    Norway
    Posts
    3,673
    #2
    Sounds to me like you might not have made a project, or perhaps not re-calculated the project after importing your sonarlogs. I highly recommend doing the according to the manuals «from start to finish»-tutorial the first few times as you need to do the steps in the correct order.

  3. Scraps
    Join Date
    Apr 2007
    Location
    Havertown, PA
    Posts
    9,586
    #3
    TC I believe you re right. I now see a bunch of settings I hadn't touched. Will give it another go.
    2017 Phoenix 819
    2016 200ProXS, s/n 2B359849, Mod 1200P73BD