Which strap/bungee for hds12 covers?

[Jdmb]

I’m sure this has been discussed but I’m new to the party. Does anyone have a name or link to the right straps/bungees to hold covers on hds12s going down the road? Thanks

[fish4bas]

Boatefx.com makes a good one

[Jdmb]

Thank you!

[Chuck H.]

I use the Wrap-It velcro straps for all my graphs. I get them at Northern Tool but I'm sure you can get them at other places.

[gambler1]

Velcro wraps from Amazon. They work great!

[golferdude]

I use bungee cords from Amazon https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 I use two of them per screen, interlock the two balls, and then stretch the two ends over the knobs or locks on each end. They have worked great with no issues with them.

[Jdmb]

Thanks!

[fisheye216]

I've been using these for the last 3 years. Work great, never had a problem

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

[fly by night]

Those work very well in many different applications.

I've been using these for the last 3 years. Work great, never had a problem

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

[ackool1234]

Boatefx is who I use, never any problems.

[rudapa]

I use a pair of 6" & 9" on each 12" https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

[HDETERS]

I've been using these for the last 3 years. Work great, never had a problem

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

what size graphs are you using them on?

[78Staff]

I had the BoatXFX ones, but lost a cover recently - posted this in the other cover strap thread. They stretch quite a bit, and I guess allowed a corner to lift and after that she went flying. I'm back to using velcro straps, same ones fisheye posted - the 1x30 works great on 12" units.

[78Staff]

I use a pair of 6" & 9" on each 12" https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

You use two different sizes for a 12"? How are you attaching them?

[rudapa]

You use two different sizes for a 12"? How are you attaching them?

I connect the 6" to the 9" and it fits around a 12" HDS Live or Carbon perfectly. I use a 2 pair on each graph, but it might be overkill when i set would work.

[rudapa]

You use two different sizes for a 12"? How are you attaching them?

you can see how they look here https://youtube.com/shorts/iCUg7Gr933g?feature=share

[78Staff]

you can see how they look here https://youtube.com/shorts/iCUg7Gr933g?feature=share

Makes sense, confused me at first lol. I've been using the envision velcro strap linked in this or the other thread, which work fine but sometimes they grab at my boat cover making the inside fuzzy... so was thinking of trying a non-velcro option. Since the BoatXFX failed me I'll take a look at the ball/cord deal... thanks.

[Woody b]

Mine is only a 9 but this is what I do.
Cover.jpg

[PhoenixDrew]

Go to Lowes and buy a roll of Velco. Cut it to fit.

[james_az]

You use two different sizes for a 12"? How are you attaching them?

a 12" balll bungee will work on 12" HDS.