I recently purchased a 2003 Legend 212 Equalizer with a 2014 250 Pro XS (2B111222). Haven't had any real time out on the water yet, but the Prop to Pad is roughly 2". I read somewhere online that another person with this boat had their P2P at 1.5" Seems a bit low compared to most that start at 3.5" and adjust from there! Give the way my boat is setup, I don't thi9nk I can actually get more then 3 or 3.25" P2P as the motor is almost at the bottom of the slot on the jack plate and as it currently sits, when I trim the motor all the way up while on the trailer, my hydraulic steering on the motor is hitting the top of the cap on the transom?!?! Any thoughts??
Also on hole shot, the bow comes up out of the water very high (can't see in front of the boat and tents to tilt to the passenger side. I can immediately start to trim up a bit to level the boat out port to SB, but was wondering if the P2P has some play in this. I also have a 29" Tempest Plus and am thinking I need to drop down to a 25 or 26 Pitch prop