Thread: What transducer

Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Nov 2015
    Location
    Struthers, ohio 44471
    Posts
    274

    What transducer

    I bought a used boat with an 9” hds gen 2 on the bow and hooked up to the trolling Minn kota and want to buy a transducer so I can use the side imaging and don’t know what transducer will mount to the outside of the trolling motor and the hds 9” gen 2?

  2. Member
    Join Date
    Nov 2013
    Location
    Norway
    Posts
    3,673
    #2
    As there never was a Gen 2 in 9, I’m guessing you have HDS Gen 2 Touch. If so, you will need a Sonarhub-module with old software and a m/h TotalScan transducer, unless you want to mount both an LSS-2 and a 2D-transducer under the TM.

  3. Member
    Join Date
    Nov 2015
    Location
    Struthers, ohio 44471
    Posts
    274
    #3
    Thank You for the info!

  4. Member
    Join Date
    Dec 2004
    Location
    Woodland, CA
    Posts
    773
    #4
    If I understand correctly, you are using the US2 transducer in the Minnkota for 2D and want a transducer for StructureScan to mount on the outside of the trolling motor. An LSS2 will connect directly to the Structure port of an HDS Gen2 Touch and provide side and down Structure views. However, you may struggle to find one and it will also be difficult to mount on a motor with an internal transducer.

    NoCAL
    2004TR-21X/2015 250 ProXS
    2B112175