I just repowered my Cobra with a new Suzuki. Will be starting the break in this weekend. My dealer has a 14x25 prop on it to test out. He said I may need to bring the 25 prop back and trade it for a 27 or 28.
I just repowered my Cobra with a new Suzuki. Will be starting the break in this weekend. My dealer has a 14x25 prop on it to test out. He said I may need to bring the 25 prop back and trade it for a 27 or 28.
2000 COBRA 201D
Suzuki 200 4 Stroke
Last edited by UKFISHIN; 11-14-2022 at 09:11 PM.
2000 COBRA 201D
Suzuki 200 4 Stroke
looking good !!!!!
I’m running a 250ss with a 14.5 x 28 4 blade Suzuki prop, and it’s about perfect for my setup. Procraft 210
Looks like he has the standard 200DF, but they appear to have the same L/U ratio as the SS model. That prop might be O.K. I suppose the best test is after you break it in by the book, see if you can hit the governed RPM full throttle at a speed you want. If so, and the hole shot is adequate, you're there.
Yeah I figure he probably is going to be a pitch or so lower being a 200.
That looks baaaad.
2017 Phoenix 819
2016 200ProXS, s/n 2B359849, Mod 1200P73BD
Thank you sir!
2000 COBRA 201D
Suzuki 200 4 Stroke
Thank you sir. I will look into that prop if needed after break in.
2000 COBRA 201D
Suzuki 200 4 Stroke
By the way, I forgot to add, nice looking combination.
2000 COBRA 201D
Suzuki 200 4 Stroke