Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Oct 2012
    Location
    California
    Posts
    71

    2001 Ranger 520 side mounted trailer jack question

    A few years ago I took off my factory trailer jack to try a motorized jack and ended up liking the factory swing jack better and want to reinstall it on the trailer. The only problem is that I lost the 4 bolts to mount it back on the trailer.

    I believe the bolts are one of the options below, can anyone confirm the correct size bolt I should be getting?
    • M8-1.25(coarse)x16
    • M8-1.0(fine) x16
    • M10-1.5(coarse)x16
    • M10-1.25(fine) x16
    • M10-1.0(extra fine)x16


    Thanks for your help

  2. Member
    Join Date
    Oct 2012
    Location
    California
    Posts
    71
    #2
    Turns out they are 3/8"-16 x 3/4"

  3. Member wmitch2's Avatar
    Join Date
    Aug 2006
    Location
    Fresno, Ca
    Posts
    4,326
    #3
    Just figure what length you need and head for the Hardware store and get them in Stainless with Nyloc nuts.
    Ranger Boats / Mercury Motors
    G Loomis Rods / Shimano Reels
    Raymarine / MinnKota Ultrex
    Garmin / Live Scope Plus
    Pepper Jigs / Robo Worms
    Troll Bridge / V-T2 Vents


  4. Member
    Join Date
    Sep 2014
    Location
    The Box, CA
    Posts
    14,150
    #4
    If you use stainless, make sure you use anti-seize on the bolt.