Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Jul 2015
    Location
    Berry, AL
    Posts
    98

    Another prop-setup question steering torque

    2015 x19 flashed 200 SHO (300). I’m running a hill signature 4 26 pitch. Tourney loaded heavy! live well full 75 no problem but really really bad steering torque at that trim and speed. I can come down to 69-70 with very little trim and it drives like my truck Am I to high or to low or is this a prop the issue. Only running a 6 inch plate.
    2015 X19 200 SHO

  2. Member 1BADAIR's Avatar
    Join Date
    Dec 2014
    Location
    OXFORD MI
    Posts
    3,895
    #2
    Hard to steer trimmed out is usually too high
    2011 Ranger z521/2023 250ProXS

  3. Member
    Join Date
    Apr 2020
    Location
    Ontario
    Posts
    590
    #3
    Hard to turn left is trim too high but if you need to trim it out that high to max out then a prop change is in order. Best thing to do is call Mark C and get him to work some magic.

  4. Member
    Join Date
    Jun 2021
    Location
    Collinsville, Al
    Posts
    32
    #4
    Any luck on resolving this?
    I have the same issue with my Power Tech 25 p prop.

    I haven't tried adjusting my jackplate yet. I'm at 3.5" now. I may raise it up 1/2"
    2021 Xpress X19 Pro 200 SHO
    2019 Crestliner VT 18 115 Pro XS. Hummingbirds, 17P X7 stainless prop