Thread: 21xrd storage

Results 1 to 13 of 13
  1. #1
    Member
    Join Date
    Sep 2013
    Location
    Oxford, MS
    Posts
    1,059

    21xrd storage

    Has anyone installed the center compartment storage kit from amped Marine? If so how do you like it?

  2. Member
    Join Date
    Feb 2019
    Location
    Texoma
    Posts
    62
    #2
    Wonder how hard it would be getting boxes in and out with them being further back in the compartment.
    08 21XRD

  3. Member
    Join Date
    Sep 2013
    Location
    Oxford, MS
    Posts
    1,059
    #3
    I had same thoughts. I'm more worried about putting more weight in front.

  4. Member
    Join Date
    Aug 2009
    Location
    Ball Ground, GA
    Posts
    485
    #4
    I already have weight there with my tackle in a Plano bag since I fish on my partners boat from tim to time. Is the center compartment the same on an XRD as a XDC? That is what their description is for. I also have the KVD soft plastic bags in a larger plastic container and this would be much better in my opinion.
    2013 Bullet 21XRD
    2020 Mercury 300R 1E080760
    3 Garmin 126SV
    LVS34/LVS32
    Ultrex with iPilot Link
    8' Raptors

  5. Member
    Join Date
    Mar 2014
    Location
    South Louisiana
    Posts
    1,266
    #5
    Can someone post a picture of the storage kit installed? I have a XDC and would love to have a more organized center storage.

  6. Member
    Join Date
    Sep 2013
    Location
    Oxford, MS
    Posts
    1,059
    #6
    To my knowledge the only difference is height but that may be incorrect. I've tried the plastic boxes and they slide around too much for me.

  7. Member
    Join Date
    Jan 2008
    Location
    Angier, NC
    Posts
    859
    #7
    I built one out of 1/4 inch thick marine board for my XRS. Might weigh 6 pounds when its all said and done. I got a 2 x 4 sheet from amazon for 30 bucks. Took me and hour to build it. No screws or attachments.

  8. Member
    Join Date
    Aug 2009
    Location
    Ball Ground, GA
    Posts
    485
    #8
    I called them and they sent me the measurements of the XDC center storage. 22 1/2" at the step by 35" long and 25 3/4" at the bow end. My compartment is 28" at the step.
    2013 Bullet 21XRD
    2020 Mercury 300R 1E080760
    3 Garmin 126SV
    LVS34/LVS32
    Ultrex with iPilot Link
    8' Raptors

  9. Member
    Join Date
    Sep 2013
    Location
    Oxford, MS
    Posts
    1,059
    #9
    Quote Originally Posted by BEEZER View Post
    I built one out of 1/4 inch thick marine board for my XRS. Might weigh 6 pounds when its all said and done. I got a 2 x 4 sheet from amazon for 30 bucks. Took me and hour to build it. No screws or attachments.
    Can you please post a picture?

  10. Member
    Join Date
    Jul 2010
    Location
    Phenix city AL
    Posts
    700
    #10
    I ordered a expandable pot and pan organizer off Amazon and it actually is the best thing I found to keep my plastic boxes in place inside the center compartment of my 01 21xdc you can adjust the width of each individual rack/section.
    Bullet 21xrs & xdc

  11. Member
    Join Date
    Jan 2008
    Location
    Angier, NC
    Posts
    859
    #11
    8B2318C7-5C7E-4BC2-A8B9-3259A45541FD.jpeg1433C0A9-A2FD-47A4-AF50-1A10B12C95C6.jpeg3B8D7EEA-9973-4381-9036-B638629DA94A.jpeg
    I cut slits in the boards and crossed them up. 48 inch piece going up with 3 pieces crossing fit snug on each side so the carpet will hold it in place. The back piece towards the front of the boat i left 12 inches tall to keep stuff from going to the front of the boat.

  12. Member
    Join Date
    Feb 2011
    Location
    Colbert ga.
    Posts
    383
    #12
    Quote Originally Posted by catch5nRide View Post
    I ordered a expandable pot and pan organizer off Amazon and it actually is the best thing I found to keep my plastic boxes in place inside the center compartment of my 01 21xdc you can adjust the width of each individual rack/section.
    we’d all love too see some pics��