Am sending a pump out for repairs and neglected to mark which line was the up and down and were they are connected on the pump. Any help on how to identified which one goes wear. Thanks dumfounded.
Am sending a pump out for repairs and neglected to mark which line was the up and down and were they are connected on the pump. Any help on how to identified which one goes wear. Thanks dumfounded.
so the lines themselves if 2.0 are labled on the actual hose Up and down, if you have 1.0 the black is down and the blue is the up. The port closest to the cap is the down, furthest from the cap is the up
I dont remember seeing any marks on the hoses I look further when the pump get back. 2.0 poles. Thanks for the info