Just noticed some of the black trim around the fender wells is coming loose, what do I need to use to stick it back in place? It's on my 2019 Puma trailer.
Just noticed some of the black trim around the fender wells is coming loose, what do I need to use to stick it back in place? It's on my 2019 Puma trailer.
2019 BassCat Puma FTD, Honda 250, Croxton Razor 4XL,Garmin Force, Power Pole Blades & Charge, Atlas JP, Ionic 36v Lithium, K2 Energy Lithium NoCo GenPro10x1, All Garmin Electronics with PanOptics LiveScope
jefflhoman.com
Same thing is happening on my 2018 Lynx trailer. Following.
Same problem here on my 2018 Caracal. Pulled away from the adhesive in the center of the wheel well. Almost like it was to short to begin with, and when it shrank up, it pulled away. Wonder if this might be covered under warranty?
My old 2004 Classic uses 1/8" rivets. I just replaced mine due to it starting to look old and faded. No adhesive, just rivets every 6" or so.
That is held on with sticky tape and rivets. Just get black 1/8” aluminum rivets and put them where the trim is coming loose.
Gun Control..... Is hitting your target every time
Factory uses rivets now.
No rivets on mine.
2019 BassCat Puma FTD, Honda 250, Croxton Razor 4XL,Garmin Force, Power Pole Blades & Charge, Atlas JP, Ionic 36v Lithium, K2 Energy Lithium NoCo GenPro10x1, All Garmin Electronics with PanOptics LiveScope
jefflhoman.com
My 18 Lynx had the same issue. I fixed it with pop rivets.
BCB Puma STS
Merc 250