Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Apr 2012
    Location
    Gastonia, North Carolina
    Posts
    65

    Axiom 12 Pro diagrams

    I have three Axiom Pro units on my boat (two at the console and one at the bow). I have started the process of removing the unit from my bow but I want to keep the two at the console. The units are all networked together and I want to keep the console units linked and remove all of the wiring for the unit at the bow. Here's what I have encountered...I can't figure Where the networking cable for the bow unit goes. I thought it would route back to my HS5 switch but it feels like it's going to the transom of my boat (I pulled it from the bow and can't get it out of the console area). What in the h&*% is that connected to??!!

    I'd like to find a diagram showing how the three units Should be linked and how two units at the console should be linked. Does anyone know where I may be able to find these? I have been all over Raymarine's web site and can't find anything like it.

  2. Honda / Raymarine Moderator Hickory Legend's Avatar
    Join Date
    Jun 2004
    Location
    Old Hickory
    Posts
    10,928
    #2
    could be connected to another unit, or a NEMA "T" also.