Page 2 of 2 FirstFirst 12
Results 21 to 27 of 27
  1. Member
    Join Date
    Aug 2012
    Location
    nc
    Posts
    38
    #21
    Wayne, if for some reason the update didn't take for the ML, is there a way to start again? I've tried putting the card in again but it won't start updating because ML is not connected

  2. Member Wayne P.'s Avatar
    Join Date
    Jan 2010
    Location
    Charlottesville, VA
    Posts
    30,314
    #22
    Quote Originally Posted by bassassin600 View Post
    Wayne, if for some reason the update didn't take for the ML, is there a way to start again? I've tried putting the card in again but it won't start updating because ML is not connected
    To update the MEGA LIVE, it has to be recognized since its processor is what gets updated, not the display. You just have to figure out what the connection issue is.
    Have you tried another Ethernet cable, disconnected/connect the Ethernet cable, direct connected it to the display, swapped Ethernet Switch ports?
    Verified power to the LIVE?
    Wayne Purdum
    Charlottesville, Va.
    Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
    SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
    MEGA LIVE, LIVE TL

  3. Member
    Join Date
    Aug 2012
    Location
    nc
    Posts
    38
    #23
    Actually doing all of that now. Bypassed switch, ML is going directly to unit now and verified power going to ML

  4. Member
    Join Date
    Feb 2013
    Location
    WY
    Posts
    37
    #24
    Question about using ML and a 2D transducer at the same time when ice fishing. When I pull the 2D transducer out the ML loses it's reading. Confused why the 2D signal would effect the ML reading. Also, is there a trick to prevent this from happening? Thanks

  5. Member
    Join Date
    Jul 2023
    Location
    Madison Wisconsin
    Posts
    4
    #25
    how many pzt elements does the mega live transducer contain?
    Last edited by MiLD GRiSO; 09-27-2023 at 10:27 AM.

  6. Humminbird Moderator SLYDoggie's Avatar
    Join Date
    Aug 2015
    Location
    Franklin TN & Tims Ford Lake
    Posts
    3,849
    #26
    Quote Originally Posted by MiLD GRiSO View Post
    how many pzt elements does the mega live transducer contain?
    I don't know that this is published. I haven't seen any details on the number... probably pretty proprietary.
    ---> Regards, Steve Yarbrough (AKA: SLYDoggieTN on YouTube)
    • Apex 19/16/13, Mega 360, and Mega Live
    • Minn Kota Ulterra Quest Trolling Motor
    • (2) Cannon Optimum Bluetooth Downriggers
    • Impulse Lithium Batteries... 36V 60AH for Trolling Motor, (2) 12V 120AH for Cranking & Electronics, 12V 60AH for Downriggers


  7. Member
    Join Date
    Nov 2022
    Location
    Texas
    Posts
    141
    #27
    first day out with my mega live... can sometimes see my bait at about 30'... thats about it. any suggestions?

Page 2 of 2 FirstFirst 12