I have a 2020 Tracker PT 175 TXW with a 75HP merc serial number 2B729824. The trim gauge at full trim down is below zero and when I trim it up to optimal plane height the gauge is a little above 0 and fully lifted for trailering is at about 50%.
I have searched high and low on the forums and the rest of the net to find out if there is a self-remedy to this as its "kind of" annoying but if I can't fix it myself, I will just keep it as is as it's not important enough to drop off at the BPS shop for lord knows how long.
Some mercs you just loosen the 2 screws that hold the sensor on the outboard in place and rotate it to and fro to adjust to zero when trimmed all the way down. My sensor does not rotate or anything when loosened and I think it is a sensor if I was to go digital screen gauges or something. Anyone else have this problem and figured it out, please let me know how you adjusted it.
I know I should also post this in the Mercury threads.. but figured I would start out here
Thank you in advance!!