Results 1 to 10 of 10
  1. #1
    Member
    Join Date
    Dec 2014
    Location
    baltimore
    Posts
    112

    Helix linking problem

    So I have a brand new 2022 skeeter with 2 helix and an ultrex and they are all plugged into the 5 way switch under dash from the factory but it won't link them..anyone know why?

  2. Member Wayne P.'s Avatar
    Join Date
    Jan 2010
    Location
    Charlottesville, VA
    Posts
    30,483
    #2
    Is the Ethernet Switch power connected?
    Wayne Purdum
    Charlottesville, Va.
    Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
    SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
    MEGA LIVE, LIVE TL

  3. Member
    Join Date
    Aug 2020
    Location
    Onalaska, Wi
    Posts
    98
    #3
    [QUOTE=kgabriele1114;12040719]So I have a brand new 2022 skeeter with 2 helix and an ultrex and they are all plugged into the 5 way switch under dash from the factory but it won't link them..anyone know why?[/QU I had to update the software on both of my units to get them to link up.

  4. Member
    Join Date
    Dec 2014
    Location
    baltimore
    Posts
    112
    #4
    Idk it was factory ran and its plugged in at the 5 way switch box and I don't know where they plugged the power into

  5. Member
    Join Date
    Dec 2014
    Location
    baltimore
    Posts
    112
    #5
    And they are brand new I'll check the updates but being brand new I would think they would have the latest update in them

  6. Member
    Join Date
    Apr 2008
    Location
    Lakeview,AR.
    Posts
    8,092
    #6
    Did you turn on the master switch on the console? Bob
    Tell me where has a slow movin' once quick draw outlaw got to go

  7. Member
    Join Date
    Feb 2014
    Location
    Shippensburg, PA
    Posts
    1,093
    #7
    I’ll 2nd the power switch. Won’t work without that

  8. Member
    Join Date
    Dec 2014
    Location
    baltimore
    Posts
    112
    #8
    Yes I have the power switch on the dash on

  9. Member
    Join Date
    Apr 2008
    Location
    Lakeview,AR.
    Posts
    8,092
    #9
    If you still suspect a power possibility, unplug the power connector from the switch and meter the plug. Bob
    Tell me where has a slow movin' once quick draw outlaw got to go

  10. Member
    Join Date
    Dec 2014
    Location
    baltimore
    Posts
    112
    #10
    So after spending nearly 2 hours on the phone with humminbird the tech there thinks I have a bad ethernet cable from the bow to the dash..brand new 2022 boat factory ran electronics and they want me to remove n send them Pic of the cable to get a new one sent to me...