Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Aug 2020
    Location
    West Palm Beach, Florida
    Posts
    50

    Garmin electronics.. pics needed

    Hey guys.. just purchased a new to me 1 owner 2005 Triton TR20X.. I’m ordering a Garmin Force and wanted to change out the original electronics and wanted to see what your guys set-ups are looking like. At the console and the bow. Hopefully someone with a 2003-2008 can show me what they’re layout looks like. I have an original Garmin 160C at the bow and wanted to remove and either blank it out from the vinyl material or figure where to place the new fishfinder, etc.. at the console I have an original lowrance so looking to upgrade both to Garmin units.. Pics would be greatly appreciated. Thanks in advance.

  2. Member
    Join Date
    Apr 2005
    Location
    Southern Maryland
    Posts
    139
    #2
    IMG_2711.JPGIMG_2713.JPGIMG_2715.JPG

    Here is what I did for my lowrance x-71 replacement up front and what I did at the console for my Garmin's.

    The front replacement / fill in was a sheet of plexiglas that i cut based on the piece i pulled out from the original setup. Added some vinyl shrinkwrap and done.
    2020 Merc 250 Pro XS 4S - S/N 2B745597

    -------------------------
    Eric
    AWFC(NAC/AW) USN (Ret) - P-3C Flight Engineer

    2003 TR-21 Bassmaster Classic Edition
    2020 Merc 250 Pro XS 4S
    Garmin 126sv (x3)
    LiveScope LSV 34 // 60A Monster Lithium
    Garmin Force 50" 36v // 3 Ionic 50A Lithium

  3. Member
    Join Date
    Dec 2012
    Location
    Central Arkansas
    Posts
    196
    #3
    Pm sent

Tags for this Thread