This is a long shot: Replacement cable for TH Marine G Force handle

[NHbassfisherman]

I have the G Force Handle kit on my Ranger. The cable actually rusted and broke. I have the Barrel shaped retainer, that the cable goes through, along with the (2) tiny set screws that hold it on. I believe its a 5/32 Cable coated. Can anyone confirm or deny, and where they found theirs.

[wareagle24]

Check with Lowes, Home Depot or your local hardware store. They sell it by the foot.

[BILL LO]

Ace Hardware

[NHbassfisherman]

ACE Hardware did not have 5/32. Had everything else. Will have to check Home Depot or Lowes.

[BMCD]

and its cheap too. u will realize the mark up once u buy the cable. But i prolly got at least 3 of these things in my garage, first one i opened was because the handle on my ghost broke. did not use the cable.

[JJohnSind]

I’m surprised the cable broke before the cheap plastic handle.

[ddement]

Mcmaster carr

https://www.mcmaster.com/products/wi...-coating~5-32/

[Bob G.]

I use a poor man’s G Force. I cut the rope in half and now have a spare.

https://www.tractorsupply.com/tsc/pr...for-lawnmowers

[Mcjenson]

I’m surprised the cable broke before the cheap plastic handle.

I've never understood how that big plastic handle was an "upgrade" over the stock one.

[dwtaylor]

I use a poor man’s G Force. I cut the rope in half and now have a spare.

https://www.tractorsupply.com/tsc/pr...for-lawnmowers

I use the same, but instead of the rope, I used green coated cable. I needed to buy crimps too, but I did mine for less than 20 bucks.

[BMCD]

I've never understood how that big plastic handle was an "upgrade" over the stock one.

I agree i'm also scared of dropping it on my screens and cracking the glass. Need to get a lighter handle to replace the gforce handle. It was all I had to replace my broken handle.

[BOATS]

I used a lawn mower handle I picked up at Lowes when the original broke. No issues since.