All been looking for seat removal instructions for my Z520L. I finally asked Ranger and they sent them to me and I thought I would share. Cheers
All been looking for seat removal instructions for my Z520L. I finally asked Ranger and they sent them to me and I thought I would share. Cheers
Good info maybe Jc2bg will pin this at the top!!!
Done. We already had a similar thread pinned, but the OP of that thread must have removed his files. Hopefully this one will have more staying power.
John Clark — Findlay, Ohio
Thank you sir, on top of things as usual!!!
These instructions are for boats that are slightly newer than mine. I’ve read they used a different slide design prior to this one. It changed to this one within a month or so after mine was built. I Emailed Ranger and they responded with “call your dealer”. Does anyone have experience removing their 2018 model seats from the skull cap?
9/22/24 UPDATE.... On my 2018 520L, made in 10/17, the skull cap is removed and the seat slides are held in with (6) 1/2" lock nuts only accessible from the bottom of the skull cap. Once the cap is loose, you can lift it up onto the rear deck and tilt it rearward to have access to those nuts. It's a heavy unit. Two person job if you have a helper available.
Last edited by bwizard; 09-22-2024 at 02:02 AM.
2018 Z520L 50th Anniversary - 250 Pro XS 2-Stroke SN - 2B527745 / Reman Powerhead Built 8/2021 SN - QSCS00380OS0