2b116638
Pulled both tracker and air regulator diagrams. To see if this why motor was running bad. Both looked good reinstalled them. Ran compression check all 6 perfect. Checked spark all good. Hooked up gauges again. They are good. Back up one second had to remove lower panels to pull fuel rails out and when I ran motor to check pressures I saw it. Motor has a hairline crack on the starboard lower side. It looks like the intake side of the crank block has the crack behind the reeds and is spitting gas oil and air out when it is running. It’s just below the big tubbing. I think the one going to the oil tank. Not sure if it’s worth fixing. Any ideas