Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Apr 2012
    Location
    Lawrenceville, IL
    Posts
    545

    Powerpole won't deploy all the way.

    Port side powerpole will only partially deploy. Starboard powerpole extends totally. Both synchronized to stomp buttons and remotes.
    Seems like the port side only goes down about 4 foot while the Starboard continues on to 8 foot.
    Could something be out of line ?
    I did take off with outboard with them partially deployed but quickly corrected the issue. This has never happened before.
    Need some food for thought on this matter.
    Hard to troubleshoot on land. Had it in 20 foot water to observe this problem.

  2. Member
    Join Date
    Jul 2020
    Location
    Tampa, FL
    Posts
    43
    #2
    It's hard to say for sure but something may have gotten bent when taking off with them partially deployed. If possible, send me a few pictures of the pole deployed on the trailer and I'll take a look and see about figuring it out. nbond@power-pole.com

  3. Member
    Join Date
    Apr 2012
    Location
    Lawrenceville, IL
    Posts
    545
    #3
    OK will do.

  4. Member
    Join Date
    Apr 2012
    Location
    Lawrenceville, IL
    Posts
    545
    #4
    Emailed u some pics

  5. Member
    Join Date
    Apr 2012
    Location
    Lawrenceville, IL
    Posts
    545
    #5
    Found one of the bushings on one end of the cylinder ends got turned putting it in a bind.
    Repositioned and all is well.