AT 2… transducer setup for FOWARD only

[reelman]

Appreciate simple detail (maybe with picts and arrows to label)…
want setup for FORWARD only on my new unit…
looking only for transducer settings if fishing under 10 feet of water here in Fla…


Many thanks.

[reelman]

AT2..set pic1.jpeg
Is this setting FOWARD?
If not what can be changed to get that?
This pic should help others besides me who need a confirmation
Thanx and use pic as you wish to label or help others

[Basshopper]

Yes

[reelman]

Thanks
Paul Gettys (expert) just e mailed that my bracket on the troll was upside down …
got that corrected a minute ago…
Am getting there… now to best software settings for always under 10 feet depth …Forward

[carson@boemarineLKN]

Definitly need to have it mounted correctly and no upside down lol. Many folks do that. For settings, I would do Depth a 20 (not on auto) and Distance set on 100. I also turn sensitivity or the contrast up plus 10-16 depending. There needs to be a little bit of clutter to see everything well. Once you get use to it, you will like it. If you have something smaller than 12 inches you probably need to set the depth on 10 and forward out to like 70 or 80.

I like 20ft and 100ft on my 12in sceen. If I go shallower I do not change it. (A 3 pound fish will look the same at all times if you keep the setting the same, so you will beceome use to it and identify fish faster.

[reelman]

Thanx
My current web research via “pro level” advice is for fishing 4-6 feet deep here in Florida…
Try these AT 2 settings:
—80% contrast
—set 10 ft over depth (not auto)
—SV on
—low noise
—R lines off
—try palette 1-light amber & 5-red first

if some other setting is missing please post…
others may be helped