"The Minn Kota trolling motor hangs off the front of the boat so far that I would have eventually damaged it, but your slide takes care of that. So thank you for all of your help". ~ Thomas from Florida

"Too much money to have hanging over the edge of your boat when loading and unloading to the trailer." ~ Andrew from Missouri (posted in the Ulterra owners FB page)


Eliminate the frustration with your trolling motor install!

Our product was first developed in 2016 for anyone who dislikes the fact that their trolling motor OVERHANGS the rub rail by several inches. Does anyone like/want the overhang? We consistently receive phone calls from customers who have accidentally damaged their trolling motor while unloading the boat (bow roller issues) or bumping it on a dock or piling.

But many of them just want to AVOID damaging their expensive trolling motor (accidents happen when we least expect it).

With the design of Xpress boats, the trolling motor will normally hang over the front of the bow, close to the bow roller. Avoid the bow roller and simply SLIDE the trolling motor BACK into the boat. No need to pick it up and carry it around the boat - leave it on the mount!

Here's a quick video from one of our commercial customers: https://fb.watch/iukbfIe_Kr/


Let us know if we can help! www.shuttleslide.com
321-345-3315 Monday - Saturday (located in Florida) - Made in the USA, lifetime warranty

Ulterra_xpress1..jpg

Terrova_Xpressbayboat.jpg

Terrova_Xpress_H190B_2022.5.jpeg