Ok....Let's get this started. Tell us about your Suki...

[BassCatKev]

I saw this was a sticky thread that I am able to post something productive on. I'm Kevin. Proud owner of a Suzuki 2017 DF250SS. I've had my new to me boat for several months but haven't used much yet. And information regarding Suzuki 4 strokes is valuable to me. Feel free to check my profile and pm any time. Thanks

[PolarKraft195]

First 4 stroke I’ve owned, and all I can say is WOW! This thing is quiet, smooth, and has torque out the butt! Hole shot is amazing!
love’n my Zuke!

[eliteangler]

Nice rig Ohio Champ!!!!

[eliteangler]

Finally got her back with the new Suzy!!

[DLinzy]

Repowered my 94 Ranger with the 2020 200SS Runs high 50's @ 5800 IMG_20210429_174924851.jpgwith the Water Grip 15 1/4 x 19 going to try the Tempest + heard it was way better.

[Wolffman5]

I’m looking to put a Suzuki 4x20 SS prop on a 2019 DF115A on my Cape Horn 17 center console. Anyone have experience with this combination and or have a prop to sell?

[Wolffman5]

What prop you running?

[Moonlighter]

I’m looking to put a Suzuki 4x20 SS prop on a 2019 DF115A on my Cape Horn 17 center console. Anyone have experience with this combination and or have a prop to sell?

3 x 14 x 20 Suzuki stainless steel props are usually a very good and common choice on 115’s, assuming of course that the boat/motor is a good match and not overly heavy etc.

I run one on my 18 ft alloy cuddy cab. Hits just over 6100rpm at WOT trimmed out to max. Very nicely matched on my boat.

A 17’ centre console should also match nicely with that combo.

[Ruth]

Just starting to restore a 1987 DT150SS HELP! LOL The last time this motor ran was 2003! But they said it ran good then ... So here goes taking my time in no hurry. Cables to engine were trashed. Got new ones with it so I will put them on. Fill plug missing on gearbox, so I am going to drain and see the mess I have there. I don't want to get too much into this till I find out if it has compression at all. Going to make a good assessment on this, do a compression test, see if it will even move it over using prop after I give it a week spraying oil in cyl. Any advice?

[UKFISHIN]

2021 Suzuki 200 4 stroke on my Viper Cobra 20ft.
https://eu.zonerama.com/UKfishin

[Moonlighter]

Just starting to restore a 1987 DT150SS HELP! LOL The last time this motor ran was 2003! But they said it ran good then ... So here goes taking my time in no hurry. Cables to engine were trashed. Got new ones with it so I will put them on. Fill plug missing on gearbox, so I am going to drain and see the mess I have there. I don't want to get too much into this till I find out if it has compression at all. Going to make a good assessment on this, do a compression test, see if it will even move it over using prop after I give it a week spraying oil in cyl. Any advice?

Suggest you also post on the Suzuki Outboards Parts forum - there are a couple of guys there who know the old 2 strokes pretty well and may be able to offer some suggestions.

https://www.suzukioutboardforum.com/...rd-parts-forum

[Boostr]

2025 Suzuki 150 Stealth... Ordered it with my Vexus 1980. Thing looks bad ass.

[billnorman1]

2025 Suzuki 150 Stealth... Ordered it with my Vexus 1980. Thing looks bad ass.

I hope it does what you want and need. This, like me, is an old post.

TexCaboCat, 10-13-2005

[mcyama]

I am very interested in some performance numbers. Is your motor currently out of break in? What year model is it 2024 or 2025? Do you have a GPS reading and also propeller brand pitch and elevation of gear case?

[Boostr]

I am very interested in some performance numbers. Is your motor currently out of break in? What year model is it 2024 or 2025? Do you have a GPS reading and also propeller brand pitch and elevation of gear case?

When I ordered the boat it said 2025 Suzuki Stealth... It's still in break in, but yeah I would like to know myself.