Page 5 of 5 FirstFirst ... 345
Results 81 to 87 of 87
  1. Member
    Join Date
    Aug 2010
    Location
    Overland Park, KS
    Posts
    274
    #81
    Quote Originally Posted by BoatBuggy View Post
    They don't look too tall at all. The 10's would be below the top of the cowling on that one.

    Too bad MK doesn't make one with the control head on the left side and one with the control head on the right side. Then anal retentive OCDs like me could get the symmetry of the control heads pointing in towards the engine or pointing out to the sides.
    Great point! I'm the same way!

  2. Member
    Join Date
    Dec 2012
    Location
    Dawsonville Ga
    Posts
    143
    #82

    Pair of 12 talons on520vx

    These talons work great !!!!!
    Attached Images Attached Images

  3. RIP Evinrude 1907-2020 JR19's Avatar
    Join Date
    Feb 2005
    Location
    Columbia, KY
    Posts
    13,380
    #83
    Quote Originally Posted by VinceJE View Post
    Is there not a way to mount one of the standard remotes to the console instead of having to buy 2 wireless foot switches?

    When I ordered both my Talons each one came with 2 remotes, 2 neck lanyards and 1 mount for the console. In total I ended up with 4 remotes, 4 neck lanyards and two console mounts. I also ordered a foot remote switch. Here is how I run my set up.

    Foot switch at the bow...it has a mode switch that allows me to use left, right or both at the same time

    I have a neck lanyard with one remote that is programmed to run both Talon's at the same time...I only use it in cool weather. In the heat of summer I have another setup that I use.

    I have a D Ring clip that is supposed to be used for car keys. On the D Ring I have a Talon remote that is programmed to run both Talons. I clip the D Ring to a belt loop or my life-jacket. this is the setup I use in the heat of summer because I do not like the neck lanyard when I am hot and sweaty.

    I have been running that set up for 10 months. I have yet to run across a situation where I felt like I need to mount one to the console. I have one on me via a lanyard or a D Ring clip at all times. I use the foot switch when up front. In my situation the console mount is not necessary.

    I have two spare remotes and both dash mounts that I do not use.

  4. Member
    Join Date
    Apr 2012
    Location
    Utah
    Posts
    168
    #84
    I just have 1 remote for both Talons, on the same lanyard as the Ulterra remote. Works well. Have a spare and few batteries in the glove box.

  5. Member
    Join Date
    Mar 2011
    Location
    Dayton Ohio
    Posts
    4,925
    #85
    I just ordered two 10 footers i have a 8 inch Magnum rapid jack jackplate will the universal mounts brackets for the talons work on this jack plate ? Will it clear the adjuster on the portside. Guys the boats are looking sharp .

  6. Member
    Join Date
    Feb 2013
    Location
    chapin, sc
    Posts
    38
    #86
    I just put a pair of 12 footers on my Triton. Best purchase Ive ever made.

  7. Member skeeter_tzx's Avatar
    Join Date
    Jan 2013
    Location
    Alabama
    Posts
    1,274
    #87
    I just put two 12's on my new Skeeter.

Page 5 of 5 FirstFirst ... 345